Fluke Biomedical VT Mobile - Manual (Page 81)

Appendices
VT for Windows
A
A-15
edg88s.bmp
Figure A-18. Leak Test Panel
Ending a Leak Test
The Leak test ends when the time runs out or when you terminate it by clicking the End
Leak Test button.
When the Leak test is over, VT for Windows prepares a report showing the final values
for the calculated parameters. Clicking the Print button prints out a final report for the
Leak test.
Conducting a Stacked Test
Overview
The Stacked test measures breath parameters over a given number of breaths and
calculates the average. Select a breath parameter by clicking the square next to the breath
parameter's name on the Full Test screen.
Starting a Stacked Test
VT for Windows runs Stacked tests for all parameters continuously.
Change the number of breaths by selecting Stacked Test in the Test Settings menu or by
clicking the Stacked Test button in the Full Test screen. With either access method, the
dialog box shown in Figure A-19 now appears. Enter the number of breaths that you want
averaged. Click the OK button to resume testing.
Running a Stacked Test
The Stacked test reports the values shown in Figure A-20. The current value is the breath
parameter for the last breath. The Stacked Value reflects the total of the breath parameter
calculations for the number of breaths specified.