Fluke Biomedical VT Mobile - Manual (Page 80)

VT MOBILE
Operators Manual
A-14
This is the pressure read on the selected pressure channel when the Leak test starts.
The initial value does not change during a Leak test.
• Leak Rate
Pressure is being lost at this rate.
• Elapsed Time
This shows the amount of time that the Leak test has been running.
• Compliance
This is the compliance value entered when starting the Leak test. This value does not
change during a Leak test.
• Volume Lost
If you entered a compliance value at the start of the Leak test, this value is the
amount of volume lost during the Leak test.
edg63s.bmp
Figure A-17. Leak Test Dialog Box