Fluke Biomedical VT Mobile - Manual (Page 73)

Appendices
VT for Windows
A
A-7
The Gas Settings function brings up the Gas Settings dialog box. See the Gas Settings
section later in this appendix.
• Gas Calculator:
This function brings up the Gas Calculator dialog box, where you can enter gas
percentages, temperature, and relative humidity.
• Barometric Pressure:
This function brings up the Barometric Pressure dialog box. Enter the local
barometric pressure in mmHg and click OK to calibrate the barometric pressure
sensor.
• Units:
The Units function brings up a dialog box for entering the desired units for the
signals.
• Printout Header:
The Printout Header function sets the print header in the Analyzer. See the Printing
section in this appendix.
edg86s.bmp
Figure A-8. Setup Menu
Test Settings
The Test Settings selection allows you to initiate a Leak or Trend test and adjust settings
for the Stacked test. You can also specify whether the previous monitor plot remains on
the display while VT for Windows displays a new plot. Finally, you can change the time
scale of all monitor plots. Refer to Figure A-9.
edg87s.bmp
Figure A-9. Test Settings Menu
Help
The Help menu accesses the VT for Windows About window.