Gas console connections – Hypertherm HT2000-200 Volt User Manual

Page 77

Advertising
background image

Part No.

Length

Part No.

Length

INSTALLATION

4-24

HySpeed HT2000

Instruction Manual

19

Nitrogen Plasma Supply Hose – Nitrogen Supply to Gas Console

Gas Console Connections

See page 4-10 for gas console connection to power supply.

Plasma Gas Supplies

Oxygen Plasma Supply Hose – Oxygen Supply to Gas Console

Note: If cutting with oxygen as the plasma gas, nitrogen must also be connected to the gas

console to achieve the proper oxygen/nitrogen mixtures in the preflow and cut flow

conditions.

Air Plasma Supply Hose

(Customer Supplied)

– Air Supply to Gas Console

Shield Gas Supplies

Any supply gases that will be used for the shield gas, attach to the same point on the gas console – see Fig.

4-14.

Shield Gas Supply Hose – Shield Supply to Gas Console

17

18

18

19

Part No.

Length

Part No.

Length

024204

15 ft (4.6 m)

024205

25 ft (7.6 m)

024155

50 ft (15 m)

024206

100 ft (30 m)

024159

150 ft (46 m)

Part No.

Length

Part No.

Length

024210

10 ft (3 m)

024203

15 ft (4.6 m)

024232

20 ft (6 m)

024134

25 ft (7.6 m)

024211

35 ft (10.6 m)

024112

50 ft (15 m)

024148

75 ft (23 m)

024116

100 ft (30 m)

024120

150 ft (46 m)

024185

180 ft (55 m)

024124

200 ft (61 m)

024043

4 ft (1.2 m)

024341

10 ft (3 m)

024342

20 ft (6 m)

024133

25 ft (7.6 m)

024012

50 ft (15 m)

024147

75 ft (23 m)

024115

100 ft (30 m)

024119

150 ft (46 m)

024184

180 ft (55 m)

024123

200 ft (61 m)

Advertising
This manual is related to the following products: