NewTek 3Play 4800 - Manual (Page 244)

Page | 228
2. Press IN or OUT on the Control Surface.
or …
3. Press the Record button in the Dashboard at the top of the Replay Desktop.
B.3.2 END RECORDING?
1. Press SHIFT + REC on the Control Surface.
or …
2. Press the Record button in the Dashboard at the top of the Replay Desktop a second
time.
B.3.3 MARK AN EVENT?
There are two principle methods for marking events:
ONE-BUTTON METHOD
1. Watch the input monitors, and press the OUT button on the Control Surface whenever a
notable event occurs (see Section 8.10).
2. This creates a new event in the CLIP LIST, setting an Out Point at the current timecode,
and an In Point as required to fulfill the default duration set in the Options menu (see
Section 6.4.2). Of course, you can trim the event afterward any time you wish.
TWO-BUTTON METHOD
1. Press the IN button on the Control Surface at any convenient time. This creates a new
‘incomplete’ event in the CLIP LIST.
2. (Optional) If nothing noteworthy occurs in the next while, feel free to press IN again
from time to time, updating the In Point of the event.
3. Press OUT to complete the event when something interesting occurs (see Section 8.10).