Sharp MX-6070N - Manual (Page 181)

2-17
COPIER►BASIC PROCEDURE FOR MAKING COPIES
AUTOMATIC 2-SIDED COPYING
USING THE AUTOMATIC DOCUMENT FEEDER FOR
2-SIDED COPYING
• To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
• Dual-side copy helps to save paper.
1
Place the original in the document feeder tray of the automatic document
feeder.
► AUTOMATIC DOCUMENT FEEDER (page 1-80)
2
Tap the [2-Sided Copy] key.
► COPYING SEQUENCE (page 2-7)
3
Select 2-sided copy mode.
(1) Select the 2-sided copy type.
(2) When the original is set to "2-Sided", select "Tablet" or
"Book" in "Original Binding".
(3) When the output is set to "2-Sided", select "Tablet" or
"Book" in "Output Binding".
(4) After the settings are completed, tap .
4
Check the paper (tray) and colour mode you want to use for copying, and tap
the keys for any other settings you want to select.
Tap the [Original] key and specify the orientation of the original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
• Paper Select ►page 2-13
• Copy Ratio ►page 2-26
• Staple / Punch ►page 2-42 , ►page 2-45
• Colour Mode ►page 2-20
• Original ►page 2-33
• Exposure ►page 2-23
• N-Up ►page 2-50
• Card Shot ►page 2-54
Originals Copies
Automatic 2-sided copying of
1-sided originals
Originals Copies Originals Copies
Automatic 2-sided copying of
2-sided originals 1-sided copying of 2-sided
originals
CA
Preview B/W
Start Colour
Start Copies
2-Sided Copy
Original Binding Output Binding
Tablet
1 → 2
Tablet Book Book
2 → 1 2 → 2 1 → 1
(1)
(2) (3)
(4)