Sharp MX-6070N - Manual (Page 478)

4-75
FACSIMILE►OTHERS FUNCTION
3
Tap the [Others] key, and tap the
[N-Up] key.
A checkmark appears on the icon.
After the settings are completed, tap .
To cancel the N-Up setting
Tap the [N-Up] key to uncheck it.
4
Tap the [Original] key.
5
Tap the [Image Orientation] key with
the same orientation as the placed
original.
If this setting is not correct, a suitable image may not be
transmitted.
After the settings are completed, tap
.
6
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
• You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
" CHECKING THE IMAGE TO BE TRANSMITTED (page 4-30) ".
• If you tap the [Change Setting] key on the scan confirmation screen, you can change the exposure, resolution, scan
size, and send size.
(However, when scanning each even-numbered page of the original, only the exposure can be changed.)
Back
Erase Dual Page Scan Book Divide
Card Shot Timer
Verif.
Stamp
Own Name
Select Transaction
Report
Memory Box
File Quick File N-Up
Polling
Sending History Others
Call Search Number
Call Program
Call Registered settings
Direct TX
Verification Stamp
Send Same Image
as Fax Address
reception memory
A4 A4
Speaker
Start
CA Preview
100%
Others
Address Fax Number
reception memory 0%
Speaker
Start
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original Original
Auto
2-Sided
Tablet
2-Sided
Booklet
A4 A4 Auto
Scan Size Send Size
Image Orientation
70%
CA
Address Book
Preview