Sharp MX-6070N User Manual

Page 839

Advertising
background image

7-124

SYSTEM SETTINGS►SYSTEM SETTINGS

Key Operation Setting

Keys Touch Sound
Controls the key touch sound level, or turns the sound off.
Make Key Touch Sound at Default Setting
When you specify the exposure in the exposure adjustment screen of each mode, a bleep sounds three times when the
reference value is reached.

Auto Clear Setting
The time until Auto Clear activates can be set to any number of seconds from 10 to 240 in increments of 10 seconds.
If the machine is not used for the duration of time set here, the auto clear function will clear any settings that have been
selected and return the screen to the base screen of copy mode or the job status screen.

Cancel Timer
This is used to disable the auto clear function.

Key Operation Setting

Time for Accepting Key Entry
This setting determines how long a key in the touch panel must be tapped until the key input is registered. The time
can be set from 0 to 2 seconds in increments of 0.5 seconds.
By lengthening the time setting, key input can be prevented when a key is tapped accidentally. Keep in mind,
however, that when a longer setting is selected more care is required when tapping keys to ensure that key input is
registered.
Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously not only each time the key is tapped but while a key is tapped.

Time for Accepting Key Entry of Long Touch
Select a time when a long key touch is detected.
Double Tap Interval Setting
Select an interval when a double tap is detected.

Disabling of Job Priority Operation

The job priority function can be disabled. When this is done, the [Priority] key will not appear in the job status screen.

Disabling of Bypass Printing

This setting is used to disable bypass printing (printing other jobs ahead of a job that has been stopped* because the
paper required for the job is not available in any of the trays).
* This does not include cases where the paper ran out during the job.

Disabling of Covers/Inserts Mode

Disables the use of the covers and inserts function.

Disable Printing of Operation Manual from the Operation Panel

Printing the manual from the operation guide embedded in the machine is prohibited.

Screen in which setting is effective

Initial value

Ratio setting screen in base screen of copy mode

Ratio 100%

Exposure setting screen in base screen of copy mode

Exposure level: 3 (medium)

Exposure adjustment screen in base screen of fax, Internet fax, and network scanner
modes

Exposure adjustment screen for Scan to HDD in document filing mode

Advertising
This manual is related to the following products: