Card setting -80, Card setting, Card area setting – Sharp MX-6070N User Manual

Page 795: Card type / card reader settings

Advertising
background image

7-80

SYSTEM SETTINGS►USER CONTROL

Search for a sub code

Enter the sub code and sub code name, then tap the [Search] key; the search result is displayed.

Settings

Card Setting

Card Area Setting

The data check during card reading can be set.

Settings

Card Type / Card Reader Settings

Use these settings for authentication and for use of a HID or other IC card.

Settings

Item

Description

Sub Code

Enter the sub code. Specify the code using up to 32 single-byte characters.

Sub Code Name

Enter the sub code. Specify the code name using up to 32 double- or single-byte
characters.

Available to

The registered billing codes can only be shared in the specified group.
When not specifying a public destination, select [All Users].
When specifying a public destination, select [Designate Public Address.], then specify a
group to share the billing code.

To register a group for specifying a public destination
In "Settings (administrator)", select [User Control] → [Organization /Group List].

Item

Description

Check System Code only in
FeliCa User Area mode

Check the System Code only in FeliCa User Area mode.

Check Facility Code in HID mode

Checks the facility code of a HID card.

Facility Code

Enters the facility code of a HID card. When you tap the [Store] key, the facility code is
stored.

Importing from the setup file

When you enter the configuration file name and tap the [Execute] key, the card area
settings are read from the configuration file. If you tap the [Clear] key, all files that match the
current search conditions are deleted.

Item

Description

Card Type / Card Reader

Enter the card type and card reader information.

Advertising
This manual is related to the following products: