Sets an image shift width (tab width), Load the tab paper, Place the original and tap the [preview] key – Sharp MX-6070N User Manual

Page 287: Copier ► other functions

Advertising
background image

2-123

COPIEROTHER FUNCTIONS

3

Sets an image shift width (tab width).

• Tap the numeric value display indicating the image shift

width, and enter a shift width using numeric keys.

• After the settings are completed, tap

and [Back] keys

in sequence.

To cancel the tab copy setting:
Tap the [Off] key.

4

Load the tab paper.

When using the bypass tray, place the paper with the print
side down.
Place the paper so that the sides with the tabs enter the
machine last.
After loading tab paper into the bypass tray, configure the
bypass tray settings as explained in "

MAKING COPIES

USING THE BYPASS TRAY (page 2-39)

".

The width of the tab paper can be as wide as A4 width (210 mm) plus 20 mm (or 8-1/2" x 11" paper (8-1/2") plus 5/8").

5

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

AUTOMATIC DOCUMENT FEEDER (page 1-80)
DOCUMENT GLASS (page 1-82)

To cancel all settings:
Tap the [CA] key.

6

Tap the [Colour Start] or [B/W Start] key to start copying.

Others

Preview

Start

Colour
Start

Back

Off

On

Original

Copy

Tab Copy

Image Shift

Change Size/Direction.

Original

(0 ~ 20)
mm

10

Store Data in Folder

File

Copy 1 page to check

Proof Copy

Colour Mode

Exposure

Select Type/Exposure

CA

B/W

Side 2

Advertising
This manual is related to the following products: