Sending both sides of a card as a – Sharp MX-6070N User Manual

Page 479

Advertising
background image

4-76

FACSIMILE►OTHERS FUNCTION

SENDING BOTH SIDES OF A CARD AS A SINGLE PAGE

(CARD SHOT)

Send the front and reverse sides of a card as a single page, without the need to send each side separately.

When using this function, the original must be placed on the document glass.

• If the original size is larger than the send size, it will result in a sending failure. Check the original size once more, and

specify it again.

• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.
• This function cannot be used in direct transmission mode or when the speaker is used to dial.

1

Place a card face down on the
document glass.

DOCUMENT GLASS (page 1-82)

2

Enter the destination fax number.

• Entering a destination number using the numeric keys

►page 4-13

• Retrieving a destination from an address book

►page 4-14

• Using a search number to retrieve a destination

►page 4-17

• Retrieving a destination from a global address book

►page 4-18

• Using a transmission log to resend

►page 4-20

3

Tap the [Others] key, and tap the [Card Shot] key.

Transmitted image

Originals

Front

Send

Example of an A4 (8-1/2" x 11") size portrait
scan transmission

Example of an A4 (8-1/2" x 11") size landscape
scan transmission

Back

Advertising
This manual is related to the following products: