System settings► setting mode list – Sharp MX-6070N User Manual
Page 723
7-8
SYSTEM SETTINGS►SETTING MODE LIST
*1 Appears when [LDAP] is set in "Authentication Settings".
*2 Appears when "Settings (administrator)" - [Sharp OSA Settings] → [External Accounting Application Settings] →[Set
Authentication Server (Server 1)] is enabled.
*3 This setting is configured in setting mode on the web page.
Billing Code Display Name Setting
No
Yes
• Main Code Display Name
Default
No
Yes
• Sub Code Display Name
Default
No
Yes
X Main Code List
–
No
Yes
X Sub Code List
–
No
Yes
●
No
Yes
X
No
Yes
Check System Code only in FeliCa User Area mode
Disabled
No
Yes
Check Facility Code in HID mode
Disabled
No
Yes
Importing from the setup file
–
No
Yes
Card Scan Test
Disabled
No
Yes
X
Card Type / Card Reader Settings (page 7-80)
No
Yes
Card Type / Card Reader
200
No
Yes
Setup Items
Factory default setting
U
A