Copy settings -83, Condition settings -83, Copy settings – Sharp MX-6070N User Manual

Page 798: Condition settings, Rotation copy setting, Add or change extra preset ratios, Setting a maximum number of copies, Initial margin shift setting, Erase width adjustment, Initialn-up setting

Advertising
background image

7-83

SYSTEM SETTINGS►SYSTEM SETTINGS

Copy Settings

Condition Settings

The following settings are related to copying.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).

Rotation Copy Setting

When the original and paper are placed in different orientations, this function automatically rotates the image 90 degrees
to enable correct copying on the paper.

Add or Change Extra Preset Ratios

Add two enlargement preset ratio values (101% to 400%) and two reduction preset ratio values (25% to 99%).
Also, you can change the preset ratio if necessary.

Setting a Maximum Number of Copies

This is used to set the maximum number that can be entered for the number of copies (number of continuous copies).
Any number from 1 to 9999 can be specified.

Initial Margin Shift Setting

This is used to set the default margin shift amount. Specify a value from 0 mm (0") to 50 mm (2") in increments of 3 mm
(1/8" ) for both the front and reverse sides.

Erase Width Adjustment

This is used to set the default erase width for erase function. Specify a value from 0 mm (0") to 25 mm (1") in increments
of 3 mm (1/8") for both edge erase and centre erase.

InitialN-Up Setting

Set the default state for N-Up. Select the page layout for N-Up, whether or not borders are added, and if added, whether
the borders are solid lines or dotted lines.

Card Shot Settings

This is used to set the default original size for the card shot function.
Specify a value from 25 mm (1") to 216 mm (8-1/2") in increments of 3 mm (1/8") for both the X (horizontal) and Y
(vertical) dimensions of the original.

Fit to Page

Enable this setting to have the [Fit to Page] key always appear in the card shot screen.

Enable the Rotation Copy setting to copy an A5 (5-1/2" x 8-1/2") size original on A5R (5-1/2" x 8-1/2"R) paper.

Preset ratios other than added preset ratios cannot be changed.

Advertising
This manual is related to the following products: