Sharp MX-6070N - Manual (Page 849)

7-134
SYSTEM SETTINGS►SYSTEM SETTINGS
Operation Settings
Cancel Auto Clear Timer
Disables the Auto Clear mode.
Disabling of Job Priority Operation
The job priority function can be disabled. If disabled, the [Priority] key is not shown on the job status screen.
Disabling of Bypass Printing
Disables bypass printing (printing other jobs ahead of a job that has been stopped * because the paper required for the
job is not in any of the trays).
* This option is ignored when paper runs out during the job.
Disable Auto Key Repeat
Disables the Auto Key Repeat function.
Disabling of Clock Adjustment
Disables the date and time from being changed.
Disabling of Covers/Inserts Mode
Disables the use of the covers and inserts function.
Disable Printing of Operation Manual from the Operation Panel
Printing the manual from the operation guide embedded in the machine is prohibited.
Device Control
Disabling of Document Feeder
Use this setting to prohibit the use of the automatic document feeder, such as when the feeder malfunctions. (When the
setting is enabled, scanning is still possible using the document glass.)
Disabling of Duplex
This is used to disable 2-sided printing, such as when the duplex module malfunctions.
Disabling of Large Capacity Cassette
This setting is used to disable the large capacity cassette, such as when it malfunctions.
Disabling of Optional Paper Drawer
This setting is used to disable the optional paper drawer, such as when it malfunctions.
Disabling of Tray Settings
This setting is used to prohibit tray settings (except for the bypass tray).
Disabling of Finisher
This setting is used to prohibit the use of finisher or saddle finisher, such as when it malfunctions.
Disabling of Offset
Disable offset output.
Disabling of Stapler
This setting is used to prohibit the use of staple, such as when the staple of finisher or saddle finisher malfunctions.
Disabling of Punch
This setting is used to prohibit the use of the folding unit.
Disabling of Master Machine Mode
Disables the Master Machine mode for tandem printing.
(Normally this setting is not necessary.)