Sharp MX-6070N - Manual (Page 267)

2-103
COPIER►OTHER FUNCTIONS
ADDING A REGISTERED IMAGE TO AN ORIGINAL
(CUSTOM IMAGE)
This function adds an image registered in the machine to an original to make a copy.
Following are two types of custom images.
• Custom stamp (Full-colour stamp image)
• Custom watermark (Stamp image with grey-scale watermark)
The combination with other functions is described in the table below.
Combined function Custom image operations
Margin Shift Shifts in the same way as for an original image.
Erase Makes a stamp copy as normal.
Dual Page Copy Makes a stamp copy by sheet.
Booklet Makes a stamp copy as normal.
Job Build Makes a stamp copy as normal.
Tandem Copy Based on the tandem copy.
Covers/Inserts Based on the custom image setting.
Separator Page Printing does not take place on separator pages.
Transparency Inserts Makes a stamp copy as normal.
N-Up Makes a stamp copy by sheet.
Book Copy Makes a stamp copy as normal.
Tab Copy Makes a stamp copy as normal regardless of image shift setting.
Card Shot Makes a stamp copy by sheet.
Mirror Image Makes a stamp copy as normal without mirror image reverse.
B/W Reverse
Prints an image as normal without B/W reverse. However, the following condition is set when
printed on a dark background.
Custom stamp: Printed in white
Custom watermark: Printed without being whitened
MEMO
MEMO
Confidential