D16 Group Drumazon 2 Drum Machine 909 Emulation Plug-In - Manual (Page 20)

Chorus
It’s a double-line chorus with feedback option.
The Chorus
The Chorus is controlled with the following set of parameters:
Delay line
• Offset - Sets the minimum time that the input signal is delayed.
• Depth - Sets the maximum amount of delay time modulation applied by the internal LFO. Delay time modulation
ranges from Offset (minimum) to Offset + Depth (maximum).
• Feedback - Sets the feedback value within the delay loop.
LFO
• Rate - Sets the frequency of the LFO controlling the delay line.
• Spatial - Adjusts the stereo phase shift between the LFO’s oscillations.
Mixing
• Lo Cut - Sets the frequency of the low cut filter on the Wet signal leaving the delay line.
• Hi Cut - Sets the frequency of the high cut filter on the Wet signal leaving the delay line.
• Fatness - Increases the volume of the second delay line that has slightly deviated parameters, which results in
fatter sound.
• Gain - Boosts the gain of the Wet signal.
• FX - Crossfades between Dry and Wet signals.
Bitcrusher
This effect features high quality resampling and bit reduction units with additional filtering in pre and post modes.
The Bitcrusher
The Bitcrusher is controlled via the following set of parameters:
20
inteRface oveRview • The sound conTrol secTion