HP 30 HP30 - Manual (Page 212)

vi
TECHNICAL STANDARDS APPLIED
The standards applied in order to comply with the essential requirements of the Directives 73/23/CEE "Electrical material
intended to be used with certain limits of voltage" and 89/336/CEE "Electromagnetic Compatibility" are the following ones:
• EN 50178 (1997) “Safety of information technology equipment”.
• EN 50081-2 (1993) “Electromagnetic compatibility. Generic emission standard. Part 2: Industrial environment.”
• EN 55011 (1994) “Limits and methods of measurements of radio disturbance characteristics of industrial,
scientific and medical (ISM) radio frequency equipment.”
• EN 50082-2 (1995) “Electromagnetic compatibility. Generic immunity standard. Part 2: Industrial environment.”
• EN 61000-4-2 (1995) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques. Section 2:
Electrostatic discharge immunity test. Basic EMC Publication (IEC 1000-4-2: 1995).”
• ENV 50140 (1993) “Electromagnetic compatibility - Basic immunity standard - Radiated radio- frequency electro
magnetic field - Immunity test.”
• ENV 50204 (1995) “Radio electromagnetic field from digital radio telephones.”
• EN 61000-4-4 (1995) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques. Section 4:
Electrical fast transients / burst immunity test. Basic EMC Publication (IEC 1000-4-4: 1995).”
• ENV 50141 (1993) “Electromagnetic compatibility. Basic immunity standard. Conducted disturbances induced by
radio-frequency fields.”
• EN 61000-4-8 (1993) “Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques. Section 8:
Power frequency magnetic field immunity test - Basic EMC Publication (IEC 1000-4-8: 1993).”