Powerware 9390 UPS 100160 kVA - Manual (Page 124)

USING FEATURES AND OPTIONS
EATON Powerware ® 9390 UPS (20–80 kVA) Installation and Operation Manual S 164201603 Rev 2 www.powerware.com 10-4
10.4 Relay Interface Module
An optional Relay Interface Modulel (RIM) uses relay contact closures to indicate the
operating status and alarm condition of the UPS system. The RIM can be
flush‐mounted or surface‐mounted on a desktop, or secured to a wall. Figure 10‐2
shows the RIM with its four 15‐pin connectors labeled J1 through J4.
Figure 10‐2. Relay Interface Module
The RIM can provide the status and alarm signals shown in Table 10‐2.
Table 10‐2. Customer Interface Connectors
Status J1 through J4 Description
UPS
AVAILABLE Pins 1 and 12 Contacts are closed when the UPS is operating in Normal mode or
ready to supply the load.
UPS OFFLINE Pins 3 and 13 Contacts are open when the UPS is offline.
Contacts are closed when the UPS is operating in Normal mode.
BATTERY
WEAK Pins 5 and 14 Contacts are closed when approximately two minutes of battery
time is remaining, before the critical load is lost.
UTILITY
FAILURE Pins 6 and 15 Contacts are closed when Utility Failure is detected.