Powerware 9390 UPS 100160 kVA - Manual (Page 97)

USING THE CONTROL PANEL
EATON Powerware ® 9390 UPS (20–80 kVA) Installation and Operation Manual S 164201603 Rev 2 www.powerware.com 8-31
Select UNIT TYPE from the System Setup Level 0 menu to display the Unit Type
screen. The Unit Type screen provides the model, CTO, and serial numbers of the
UPS unit. Figure 8‐41 shows the Unit Type screen. To return to the System Setup
screen, press the
pushbutton.
MODEL:
CTO: Powerware 9390
SERIAL:
0000000000000000
0000000000000000
UNIT TYPE
Figure 8‐41. Unit Type Screen
8.2.9 System Setup Level 1 Screens
A password is required to access the Level 1 functions. To enter the password, select
ENTER PASSWORD from the System Setup Level 0 menu to display the Enter
Password screen. Figure 8‐42 shows the Enter Password screen.
Use the or pushbuttons to select the password character position. Use the or
pushbuttons to change the password character. Once the password is entered,
press the DONE pushbutton. The System Setup Level 1 menu screen is displayed. The
default password is L1.
L1
ENTER PASSWORD
DONE
Figure 8‐42. Enter Password Screen