Powerware 9390 UPS 100160 kVA - Manual (Page 95)

USING THE CONTROL PANEL
EATON Powerware ® 9390 UPS (20–80 kVA) Installation and Operation Manual S 164201603 Rev 2 www.powerware.com 8-29
8.2.8 System Setup Level 0 Screens
Press the SETUP pushbutton on the main menu bar to display the System Setup
Level 0 Screen. This screen can be used to:
S
Enter a password to access Level 1 functions (see paragraph 8.2.9)
No password is necessary to access Level 0 functions.
S
Set the screen contrast
S
Show the firmware versions installed
S
Identify the unit type
Figure 8‐38 shows the System Setup Level 0 menu screen.
Use the or pushbuttons to highlight the setup function screen desired, then
press the SELECT pushbutton to display the function screen.
ENTER PASSWORD
CONTRAST ADJUST
VERSIONS
UNIT TYPE
SYSTEM SETUP LEVEL 0
SELECT
Figure 8‐38. System Setup Level 0 Screen