IDEC FL1E SmartRelay - Manual (Page 147)

IDEC SmartRelay functions
IDEC SmartRelay Manual 133
The display in programming mode (example):
B12 +R
T
B006 m
If the referenced block (B6, in the example) returns a value
that lies out of the valid range, the value is rounded up or
down to the next valid value.
Parameter preset = Actual value of an already-programmed function
How to include the actual value of an already-programmed
function:
1. Press to move the cursor to the equal sign of
parameter T.
T =04:10h
B12 +R
T
=04:10h
B12 +R B12 +R B12 +R
T
=04:10h T =04:10h
Press
twice
2. Press to change the equal sign into an arrow. If it
exists, the last referenced block and its timebase is
shown.
B12 +R
T
B006s
3. Press to move the cursor to the ”B” of the shown block,
and then press to select the required block number.
4. Press to move the cursor to the block’s timebase and
press to select the required timebase.
B12 +R
T
B006 m