IDEC FL1E SmartRelay - Manual (Page 59)

IDEC SmartRelay installation and wiring
IDEC SmartRelay Manual 45
Requirements for transistor outputs
The load connected to IDEC SmartRelay must have the
following characteristics:
• The maximum switched current is 0.3 A per output.
Connecting
This is how you connect the load to an IDEC SmartRelay
with transistor outputs:
FL1B-M08
Q1 Q2 M M
Q5 Q6 M M
Load: 24 V DC, 0.3 A max.
Load Load