IDEC FL1E SmartRelay - Manual (Page 341)

IDEC SmartRelay without display
IDEC SmartRelay Manual 327
Reading current data
WindLGC (see Chapter 7) provides an online test for reading
the current data of all functions while the system is in RUN.
If your IDEC SmartRelay without display holds a protected
memory cartridge or combined memory/battery cartridge,
you cannot read the current data unless you enter the correct
password for the circuit program. The circuit program is
otherwise deleted from IDEC SmartRelay memory when you
remove the memory cartridge or combined memory/battery
cartridge to connect the PC cable. (See Chapter 6.1).
Deleting the circuit program
Use WindLGC to delete the circuit program and password if
a password exists.