IDEC FL1E SmartRelay - Manual (Page 210)

IDEC SmartRelay functions
196 IDEC SmartRelay Manual 
Message Text Function Block
Symbol in IDEC
SmartRelay
Wiring Description
Input En A 0 to 1 transition at input En (Enable)
starts the output of the message text.
Input P P: Priority of the message text 
Range of values: 0...127 
Message destination 
Message tick settings
Ack: Acknowledgment of the
message text
Parameter Text: Input of the message text
Par: Parameter or actual value of
another already-programmed
function (see ”Visible
parameters or process
variables”)
Time: Display of the continuously
updated time-of-day
Date: Display of the continuously
updated date
EnTime: Display of the time of the 0
to 1 transition of the signal at
input En
EnDate: Display of the date of the 0 to
1 transition of the signal at
input En
I/O status names: Display of a digital
input or output status name, for
example “On” or “Off”
Analog Input: Display of an analog
input value to be shown in
message text and updated
according to the analog time.
Note: You can only edit the Text
parameter of the message
from the IDEC SmartRelay
base module. ISO8859-1 is the
only available character set for
editing text. You can edit all
other parameters, and other
languages for the Text
parameter from WindLGC.
See the online help for
configuration details.
Output Q Q remains set as long as the
message text is set.