IDEC FL1E SmartRelay - Manual (Page 335)

IDEC SmartRelay Manual 321
B
Determining the cycle time
The program cycle is the complete execution of the circuit
program, that is, primarily the reading in of the inputs, the
processing of the circuit program and the subsequent
reading out of the outputs. The cycle time is the time required
to execute a circuit program once in full.
The time required for a program cycle can be determined
using a short test program. This test program is created in
IDEC SmartRelay and returns a value during its execution
in parameter assignment mode from which the current cycle
time is derived.