Anritsu 682XXB - Manual (Page 120)

7. After making the selections, click on the OK but-
ton.
8. Press <ENTER> on the keyboard.
9. Verify that a
$
prompt appears on the PC display.
10. This completes the initial setup for calibration.
PC Setup —
Windows 95 Configure the PC with Windows 95 operating sys-
tem to interface with the 682XXB/683XXB as fol-
lows:
1. Power up the 682XXB/683XXB.
2. Power up the PC and place it in Windows.
3. Click on the Start button to activate the first
menu.
4. Go to Programs and place the mouse pointer on
Accessories to highlight the third menu.
5. Select Hyper Terminal to bring up the selection
window (below).
6. Click on Hypertrm (Hypertrm.exe) to bring up
the New Connection window (next page).
4-10 682XXB/683XXB MM
CALIBRATION INITIAL SETUP