13 exchange assembly program 1-14, 14 replaceable subassemblies and parts 1-14, Program description, 1-14 – Anritsu 682XXB User Manual

Page 24: Parts and subassemblies, replaceable, 1-14, Parts ordering information, 1-14, Replaceable subassemblies and parts, 1-14, Exchange assembly program -14, Replaceable subassemblies and parts 1-14, General exchange information assembly program

Advertising
background image

1-13

EXCHANGE
ASSEMBLY PROGRAM

ANRITSU maintains an exchange assembly program for selected
682XXB/683XXB subassemblies and RF components. If a malfunction
occurs in one of these subassemblies, the defective unit can be ex-
changed. Upon receiving your request, ANRITSU will ship the ex-
change subassembly or RF component to you, typically within 24
hours. You then have 45 days in which to return the defective item. All
exchange subassemblies or RF components are warranted for 90 days
from the date of shipment, or for the balance of the original equipment
warranty, whichever is longer.

Please have the exact model number and serial number of your unit
available when requesting this service, as the information about your
unit is filed according to the instrument’s model and serial number.
For more information about the program, contact your local sales rep-
resentative or call your local ANRITSU service center. Refer to Table
1-5, on page 1-18, for a list of current ANRITSU service centers.

1-14

REPLACEABLE
SUBASSEMBLIES
AND PARTS

Table 1-3 lists those replaceable subassemblies and RF components of
the 682XXB/683XXB that are presently covered by the ANRITSU ex-
change assembly program. Table 1-4, on page 1-16, lists common re-
placeable parts for the 682XXB/683XXB that are not presently on the
exchange assembly program.

All parts listed in Tables 1-3 and 1-4 may be ordered from your local
ANRITSU service center.

1-14

682XXB/683XXB MM

GENERAL

EXCHANGE

INFORMATION

ASSEMBLY PROGRAM

NOTES: (1) P = Performance Verification Tests (Chapter 3); C = Calibration (Chapter 4); T = Troubleshooting (Chapter 5)

INSTRUMENT

CRITICAL

SPECIFICATION

RECOMMENDED

MANUFACTURER/MODEL

USAGE

(1)

Microwave (Pulse)
Detector

Output Polarity: Negative
Frequency Range: 0.01 to 40 GHz

ANRITSU, Model SC3800
(K input/BNC output connectors)

P

High Pass Filter

150 MHz High-Pass Filter (DC Block)

Narda, Model 4564

P

Low Pass Filter

450 MHz Low-Pass Filter

Mini-Circuits, Model SLP-450

P

Personal Computer

PC Configuration: IBM AT or compatible
Operating System: Windows 3.1
Accessories: Mouse

Any common source

C

Serial Interface Assy

Provides serial interface between the PC
and the 682XXB/683XXB.

ANRITSU P/N: T1678

C

Tee

Connectors: 50

W

BNC

Any common source

C, P

Cables

Connectors: 50

W

BNC

Any common source

C, P, T

Table 1-2.

Recommended Test Equipment (3 of 3)

Advertising
This manual is related to the following products: