Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel - Manual (Page 110)

110 MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014
Programming Master Programming Level
 ANN-I/O Point Option
If Point is selected as the module option, the first ten LEDs on the first ANN-I/O module will
display the system status information. The remaining 30 LEDs on the first module and 40 LEDs on
each additional module will display the active/alarm status of each point in the Point Range
programmed for that particular module. The points that will be annunciated on a particular ANN-
I/O module depend on the programming options selected as far as the device type (detector or
module) to be annunciated. The LED assignments for each ANN-I/O module will be as follows.
Module LED
Point Range
1-30
Point Range
31-70
Point Range
71-99
1 AC Fault Point 31 Point 71
2 Fire Alarm Point 32 Point 72
3 Supervisory Point 33 Point 73
4 Trouble Point 34 Point 74
5 Alarm Silenced Point 35 Point 75
6 Earth Fault Point 36 Point 76
7 Battery Fault Point 37 Point 77
8 Charger Fault Point 38 Point 78
9 NAC Fault Point 39 Point 79
10 Disabled Point 40 Point 80
11 Point 01 Point 41 Point 81
12 Point 02 Point 42 Point 82
13 Point 03 Point 43 Point 83
14 Point 04 Point 44 Point 84
15 Point 05 Point 45 Point 85
16 Point 06 Point 46 Point 86
17 Point 07 Point 47 Point 87
18 Point 08 Point 48 Point 88
19 Point 09 Point 49 Point 89
20 Point 10 Point 50 Point 90
21 Point 11 Point 51 Point 91
22 Point 12 Point 52 Point 92
23 Point 13 Point 53 Point 93
24 Point 14 Point 54 Point 94
25 Point 15 Point 55 Point 95
26 Point 16 Point 56 Point 96
27 Point 17 Point 57 Point 97
28 Point 18 Point 58 Point 98
29 Point 19 Point 59 Point 99
30 Point 20 Point 60 Not Used
31 Point 21 Point 61 Not Used
32 Point 22 Point 62 Not Used
33 Point 23 Point 63 Not Used
34 Point 24 Point 64 Not Used
35 Point 25 Point 65 Not Used
36 Point 26 Point 66 Not Used
37 Point 27 Point 67 Not Used
38 Point 28 Point 68 Not Used
39 Point 29 Point 69 Not Used
40 Point 30 Point 70 Not Used