Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel - Manual (Page 155)

MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014 155
Transmittal Priorities Central Station Communications
The table below shows UL listed receivers which are compatible with the MS-9200UDLS.
1. With 685-8 Line Card with Rev. 4.4d software
2. With 124060V206B and 124063 Line Card Rev. B
3. With version V2.4 Receiver and 126047 Line Card Rev. G
4. With 124077V2.00 Receiver and 126047 Line Card Rev. M
5. With V.7301 Receiver S/W
6. With 01.01.03 Receiver S/W and Line Card 01.01.03
7. With software V1.86
8. With software V1.72
9. With DSP4016 and V1.6 Line Card
10. With software V3.9
IMPORTANT! It is the installer’s responsibility to ensure that the Digital Alarm
Communicator/Transmitter is compatible with the Central Station Receiver, utilized by the
monitoring service, prior to installation. The Compatibility Table provides a list of compatible
receivers and associated software versions for the receivers. Changes in the hardware and/or
software by the receiver manufacturers may affect the receiver compatibility with the FACP DACT.
After completing the installation, communication between the DACT and Central Station Receiver
must be tested and verified.
Format
Ad
emco
685 (1) Ad
emco
MX8000 (
2
)
Silen
t Kn
igh
t
9500
(3)
Silen
t Kn
igh
t
9800
(4)
Osb
o
rn
e Hof
fm
a
n
2000
E
(
5)
Rad
ion
ics
6600
(6)
SurGard MLR2 (7) SurGard System III (8) SurGard ML
R-2000
(9)
FB
I
CP220
FB (
10)
0 SIA-DCS-8       
1 SIA-DCS-20       
2 Ademco Contact ID          
Table 5.1 Compatible UL Listed Receivers