4 trouble reminder, 5 timers, 6 nac – Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel User Manual

Page 147: 7 relays

Advertising
background image

MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014

147

Read Status

Operating Instructions

4.23.4 Trouble Reminder

Pressing 1 while viewing Read Status Screen #2 will display the following screen:

The screen indicates whether the Trouble Reminder feature is On or Off.

4.23.5 Timers

Pressing 2 while viewing Read Status Screen #2 will cause the following Timer screens to be
displayed:

These screens will indicate the delay time, in seconds, for each of the first three possible delay
options. The AC Loss Delay time is displayed in hours.

4.23.6 NAC

Each NAC can be programmed individually with unique settings with the exception of Canadian
Mode. When the Canadian Option is seletected in programming (see “Canadian Option” on
page 100), all NA
C settings are changed to that of NAC 1. While in Canadian Mode, if any NAC is
setting is changed, all other NACs will get those same settings. Pressing 3 while viewing Read
Status Screen #2 will display the following screen:

The operator can press 1 to view the programmed options for NAC 1, 2 to view the programmed
options for NAC 2, 3 to view the programmed options for NAC 3, or 4 to view the programmed
options for NAC 4. The resulting screens will display the following information:

Enable/Disable Status

Circuit Type (Bell, Strobe, etc.)

Silenceable/Nonsilenceable

Auto Silence Enable/Disable and time delay (in minutes)

Coding Selection (Temporal, Steady, etc.)

Zone Assignments

Silence Inhibit Enabled/Disabled

Synchronization Type (System Sensor, Wheelock, or Gentex)

MNS Override Enabled/Disabled

4.23.7 Relays

Pressing 1 while viewing Read Status Screen #3 will display the following screen:

READ STATUS

1=TROUBLE REMINDER

2=TIMERS

3=NAC

Read Status Screen #2

TROUBLE REMINDER

TROUBLE REM ON

TIMERS

PAS DELAY 000

PRE SIGNAL 000

WATERFLOW 000

TIMERS

AC LOSS DELAY 4

NAC

1=NAC 1 3=NAC 3

2=NAC 2 4=NAC 4

READ STATUS

1=RELAYS

2=PROGRAM CHECK

3=HISTORY

Read Status Screen #3

RELAY

1=RELAY 1

2=RELAY 2

3=RELAY 3

Advertising