Trouble reminder, Banner, Trouble reminder banner – Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel User Manual

Page 92

Advertising
background image

92

MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014

Programming

Master Programming Level

Trouble Reminder

The Trouble Reminder features causes the control panel piezo to sound a reminder ‘beep’ for
alarms and troubles, after the panel has been silenced. Refer to “System Setup” on page 91, for a
detailed description of this feature. Pressing 1 while viewing System Setup Screen #1 will cause
the display to toggle to Trouble Rem On, which enables this feature. Each press of the 1 key will
cause the display to toggle between Trouble Rem On and Trouble Rem Off.

Banner

The top line of the display, which appears when the control panel is in normal mode, can be
changed by using the Banner option. Pressing 2 while viewing System Setup Screen #1 will cause
the following to be displayed:

Pressing 1 while viewing the Banner Screen will select the blank factory default banner setting and
display the following screen:

Pressing the Enter key will store this selection in nonvolatile memory and return the display to the
Banner Screen.

Pressing 2 while viewing the Banner Screen will cause the following screens to be displayed:

These screens allow the programmer to enter a two line custom banner. A flashing cursor will
appear in the bottom left corner of each display. A maximum of 20 characters (including spaces)
can be entered into each screen for a total of two lines with 40 characters. After entering up to 20
characters in the first screen, press Enter to view the second screen. Enter up to 20 characters in the
second screen in the same manner or just press Enter if a second banner line is not being entered.
To quickly clear the current banner, press the CLR key.

To enter alphanumeric characters from the keypad, repeatedly press the appropriate key until the
desired character is displayed in the first position. For example, to enter the letter B, press the 2
(ABC)
key three times to toggle through the characters 1, A, and B. Press the right arrow key to
move the cursor one position to the right and repeat the process to enter the next character. To enter
a space, press the * (QZ) key four times to place a blank in the desired position. When all
characters have been entered, press the Enter key to store the information. The display will return
to the Banner Screen.

BANNER

1=FACTORY

2=USER DEFINED

Banner Screen

BANNER

1=FACTORY

2=USER DEFINED

Banner Screen

FACTORY BANNER

Factory Banner Screen

USER DEFINED BANNER

PRESS ENTER IF OK

User Defined Banner Screen #1

USER BANNER - LINE 2

PRESS ENTER IF OK


User Defined Banner Screen #2

Advertising