6 remote synchronization output, Remote synchronization output, Figure 2.9 nac style z (class a) wiring – Fire-Lite MS-9200UDLSC Addressable Fire Alarm Control Panel User Manual

Page 35: Figure 2.10 remote sync output

Advertising
background image

MS-9200UDLS Series Manual — P/N 52750:H 4/14/2014

35

Remote Synchronization Output

Installation

2.5.2 Style Z (Class A) NAC Wiring with ZNAC-92 Converter

2.6 Remote Synchronization Output

Synchronization is a feature that controls the activation of notification appliances in such a way that
all devices will turn on and off at exactly the same time. This is particularly critical when activat-
ing strobes which must be synchronized to avoid random activation and a potential hazard to indi-
viduals. Devices connected directly to the control panel’s NACs can be synchronized as described
in “Type” on page 96.

Notification appliances connected to FCPS NAC power supplies require synchronization with the
FACP’s devices. This can be accomplished by connecting the Remote Synchronization Output
from TB2 of the MS-9200UDLS to the sync input of the FCPS-24FS6/8 Power Supply. The
24 VDC signal from TB2 follows, that is mimics, the signal on NAC1. This allows the devices
connected to the power supply to be synchronized with the devices connected to NAC1 on the
FACP.

The Remote Synchronization Output is power-limited and supervised (refer to “UL Power-limited
Wiring Requirements” on page 36).
A 4.7 K

 ELR resistor must be connected to the end of the

wiring at the remote power supply.

4 Style Z (Class A) Notification Appliance Circuits, supervised and power-limited

Polarized Bells

Polarized Horn

Polarized Horn

Notification Appliance Circuit
polarity shown in alarm state

Polarized Bell

Polarized Strobe

Polarized Strobe

Figure 2.9 NAC Style Z (Class A) Wiring

NAC 1

NAC 2

TB3

TB4

NAC 3

NAC 4

Dummy Load all unused circuits

circuit number

Polarized Bell

Polarized Horns

Polarized Strobes

circuit number

TB1

TB2

9

2

0

0

c

n

a

c

z

.w

m

f

ZNAC-92

1B+ 3B+ 3B- 1B-

2B+ 4B+ 4B- 2B-

TB3

TB4

+ 24V -

NON-RST

POWER

+ 24V -

RST

POWER

TB1

JP7

REMOTE PWR
SUPPLY SYNC

+ -

TB2

Figure 2.10 Remote Sync Output

Remote Power Supply

FACP main circuit board

Remote Sync Output

Sync Input

4.7 K

 ELR

9

2

u

d

c

s

y

n

c

.w

m

f

Advertising