Avaya P580 - Manual (Page 122)

3-10 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3
Chapter 3
CLI Command
To set Summer Time Hours that are not based on a standard rule
using the CLI, enter the following command from Configure mode:
<configure># clock summer-time date
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Beta Version 5.3 for details about this
command.
Setting the System Clock
The system clock is used for setting traps, alarms, and other events
on the switch.
* Note: You must set SNTP and Summer Time Hours before you
can set the system clock. Refer to "Enabling the Simple
Network Time Protocol" and "Setting Summer Time
Hours" earlier in this chapter.
The system clock does not automatically change with
Daylight Savings Time.
You can set the system clock from either the Web Agent or the CLI.
Web Agent
Procedure
To set the system clock using the Web Agent:
1. Select System Clock from the System > Configuration group
on the Web Agent window. The System Clock dialog box
opens (Figure 3-6).