Avaya P580 - Manual (Page 511)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 15-5
Configuring AppleTalk Routing
Creating an AppleTalk Routing Interface
You can create an AppleTalk routing interface using the Web Agent
or CLI.
Using the Web
Agent
To create an AppleTalk routing interface using the Web Agent:
1. Enable AppleTalk routing globally. Refer to "Enabling
AppleTalk Global Routing"”, earlier in this chapter.
2. Select Interfaces from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Interfaces dialog box opens (Figure 6-119).
Figure 6-119. AppleTalk Interfaces Dialog Box
3. Select CREATE. The Add AppleTalk Interfaces dialog box
opens (Figure 6-120).