Avaya P580 - Manual (Page 469)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 12-13
Configuring IPX Routing
CLI Command
To delete an IPX static route using the CLI, enter the following
command from Configure mode:
(configure)# clear ipx route {<network>
default|*}
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Modifying IPX Static Routes
You can modify IPX static routes form either the Web Agent or the
CLI.
Web Agent
Procedure
To modify an IPX static route using the Web Agent:
1. Select Static Routes from the Routing > IPX >
Configuration group on the Web Agent window. The IPX
Static Routes dialog box opens (see Figure 6-98).
2. Select the checkbox for the IPX static route that you want to
modify from the Select column.
3. Refer to Table 6-67 to modify the IPX Static Route
configuration.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
CLI Command
To modify an IPX static route using the CLI, enter the following
command Interface mode:
(config-if:<if-name>)# ipx route <network
address|range> <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Creating IPX Static Services
You can create IPX static services using either the Web Agent or the
CLI.