Assigning a priority to a dscp, Assigning a priority to a dscp -21, Gn priorities to dscps, see – Avaya P580 User Manual
Page 667: Assigning a priority to a, Dscp, Example, Command
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
-21
80-Series QoS
Example
To set all ports on the module in slot 3 to mask the three least
significant bits of the DSCP, enter:
set port mask-diffserv 3 on
Assigning a Priority to a DSCP
Command
Use the set diffserv priority command to assign a priority to a
DiffServ code point (DSCP) in the DiffServ Mapping Table. The
syntax of the command is:
Avaya(configure)#set diffserv priority <priority> dscp <dscp-start-
range> [<dscp-end-range>]
Example
To assign a priority of 7 to DSCPs 15 through 63, enter:
set diffserv priority 7 dscp 15 63
{on | off}
Indicates whether the switch masks the
three least significant bits of the DSCP:
• Enter on to mask the bits.
• Enter off to not mask the bits.
The default setting is off.
Table 6-147. Keywords, Arguments, and Options
Keyword, Argument
or Option
Definition
2 of 2
Table 6-148. Keywords, Arguments, and Options
Keyword, Argument
or Option
Definition
<priority>
The priority that you want to assign.
Enter a number between 0 and 7.
<dscp-start-range>
The first DSCP in the range of DSCPs that
you want to assign the priority to. DSCPs
range from 0 to 63.
[<dscp-end-range>]
The last DSCP in the range of DSCPs that
you want to assign the priority to. DSCPs
range from 0 to 63.