Avaya P580 - Manual (Page 596)

17-16 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
2. Refer to the Table 6-113 for an explanation on the Event
Statistics window parameters.
Viewing Event
Statistics Using
the CLI
To view a specific number of event statistics using the CLI, enter the
following command from Configuration mode:
<configure># show logging <num-events>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about these
commands.
Setting Log Size
You can set the log size using either the Web Agent or the CLI.
Setting Log Size
Using the Web
Agent
To set the log size using the Web Agent:
1. Select General Events from the Events group on the Web
Agent window. The General Event Management dialog
box opens (Figure 6-162).
2. Select the number of entries you want to store in each of the
switch event logs from the Event Log field pull-down menu.
Table 6-113. Event Statistics Window Parameters
Parameter Definition
Event Log wraps Displays the number of times the Event Log has
wrapped. The Event Log may or may not wrap,
depending on how many events have been sent to
the Event Log and when it was last cleared. When
the event log does wrap, the old events are
discarded and replaced with the newest events.
Events dropped
due to overload of
event system Displays the number of events that were dropped
to prevent overloading.
Events dropped
due to event
system queue full Displays the number of events that were dropped
due to a full Event System queue.