Avaya P580 - Manual (Page 142)

4-12 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
Chapter 4
3. Refer to Table 4-2 to configure the VLAN Switch Ports
dialog box parameters:
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Table 4-2. VLAN Switch Port Dialog Box Parameters
Parameter Defines...
Port The switch port associated with the VLAN.
Name The switch default port name or the user assigned
port name.
Binding Type The binding types are set through the switch ports.
Refer to the "Assigning VLANs to a Port and
Associated Issues" section in Chapter 5.
• Static - when switch ports are added manually
and can be removed
• Persistent - when switch ports are bound to
VLANs automatically but can not be removed.
automatically (i.e., if the binding for a switch
port is set to 'Bind to All').
• Dynamic - when a switch port is assigned to
VLAN using automatic VLAN binding,(i.e. if the
binding for a switch port is set to “Bind to
Received”). The VLAN may be deleted, but if the
port VLAN binding is “Bind to Received”, the
VLAN may be re-added by receiving tagged
traffic. This causes the port to again dynamically
bind to the VLAN.
Refer to “Configuring Port VLAN Parameters,” in
Chapter 4 for more information.
Frame Format • From Port - causes port to send frames using
the frame format specified in the Trunk Mode
attribute of the corresponding switch port.
• Clear - causes port to send untagged frames on
this port for this VLAN.
Note: Refer to “Configuring Port VLAN
Parameters,” in Chapter 4 for more
information.