Avaya P580 - Manual (Page 687)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 -41
80-Series QoS
Setting Up CBQ
Use the set port queue service cbq command to set a port, port
range, or module to use class-based queuing (CBQ) queue servicing.
The syntax of the command is:
Avaya(configure)# set port queue service {{<mod-num> | <mod-
swport-range>} [..., {<mod-num> | <mod-swport-range>}] | all-
ports} cbq queue <queue> bit-rate <rate>
Table 6-159. Keywords, Arguments, and Options
Keyword, Argument
or Option Definition
<mod-num> The slot number of a module. If you
specify <mod-num>, all ports on the
module are set to use CBQ.
<mod-swport-range> The slot number of a module, and, either
a port number, or a range of port
numbers having the format Px-Py. For
example:
• To specify port 1 on the module in
slot 3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the
port or range of ports that you specify is
set use CBQ.
all-ports All ports in the chassis. If you specify all-
ports, all ports on all modules in the
chassis are set to use CBQ.
<queue> The queue number, which can range
from 0 to 7.
1 of 2