Avaya P580 - Manual (Page 192)

5-12 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter 5
Configuring Physical Port Parameters
This section contains the following procedures:
■
Configuring Physical Port Parameters on Gigabit Ports
■
Configuring Physical Port Parameters on Fast Ethernet Ports
■
Using the All Ports Configuration Window
Configuring Physical Port Parameters on Gigabit Ports
You can configure the physical port parameters on Gigabit ports
using either the Web Agent or the CLI.
Web Agent
Procedure
To configure ports on a gigabit module using the Web Agent:
1. Select Configuration from the Modules & Ports group on
the Web Agent window. The Module Information dialog box
opens (Figure 5-1).
Figure 5-1. Module Information Dialog Box
2. Select the port from the Ports column for the Gigabit module
that you want to configure. The Physical Port Configuration
dialog box for that module opens (Figure 5-2).