Avaya P580 User Manual
Page 424
11-6
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Chapter
Figure 6-80. ADD OSPF Area Dialog Box
3. Refer to Table 6-54 to configure the Add OSPF Area dialog
box parameters:
4. Click CREATE to save your changes, or CANCEL to restore
previous settings.
Table 6-54. Add OSPF Area Dialog Box Parameters
Parameter
Allows you to...
Area ID
Specify the Area ID (32-bit character) for the new area.
This must be a unique ID within AS.
Note:
Do not use 0.0.0.0 as an area ID.
Area Type
Select the type of area. Types include:
• Non-Stub - Non-edge device/router.
• Stub - An edge device/router that does not leak
external advertisements.
• Not-so-stubby - This is still a stub area, however,
this device/router can leak some external
advertisements.
Translate 7
into 5
Enable or Disable the translation of the NSSA ASE Type
7 into an AS External LSA Type 5.
Stub Metric
Specify the stub area default summary cost metric.
(Default is 1).
Type 3 ASE
Filter
Select to enable or disable the Type 3 summary LSA filter
for Stub and NSSA only.