Avaya P580 - Manual (Page 538)

15-32 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
2. Refer to Table 6-91 for a definition of the AppleTalk ARP
Cache Table parameters.
3. Select the checkbox next to any specific ARP entries that you
want to delete and click Delete Entries.
or
Click Flush Route Table to reset the ARP cache table
entries. Only Dynamic and Router Neighbor entries are
flushed.
Using the CLI
To view the AppleTalk ARP cache table using the CLI, enter the
following command from User mode:
> show appletalk arp [all]
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Viewing the AppleTalk Zone Table
You can view the AppleTalk Zone table using either the Web Agent
or the CLI.
Table 6-91. AppleTalk ARP Cache Table Parameters
Parameter Definition
Select Select the table entry to be acted upon.
Network Range Displays the network range.
Node Displays the node number for the entry.
MAC Address Displays the MAC address associated with the
AppleTalk ARP cache table entry of the node.
Interface Displays the AppleTalk interface associated with the
AppleTalk ARP cache table entry.
Type Displays the type of cache entries.The values are:
• Local
• Broadcast
• Dynamic
• Router Neighbor
TTL Displays the time-to-live value for the selected
AppleTalk ARP cache table entry. Local and
Broadcast entries do not time out.