Avaya P580 - Manual (Page 560)

16-18 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Chapter
Table 6-101. Static Multicast Sessions Dialog Box
3. Select the checkbox next to the static multicast session that
you want to delete.
4. Click DELETE to remove the static multicast session.
Using the CLI
To delete a static multicast session using the CLI, enter the following
command from Configure mode:
<configure># clear intelligent-multicast
static-session <options>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Creating Static Client Ports
You can create and add static client ports using either the Web
Agent or the CLI.
* Note: You can only add static client ports to static sessions on
VLANs that the port is bound to or on sessions created
for All VLANs.
Using the Web
Agent
To create a static client port using the Web Agent:
1. Select Static Sessions from L2 > Intelligent Multicast
group on the Web Agent window. The Static Multicast
Sessions dialog box opens (Figure 6-152).
Parameter Definition
Select Select the static multicast session to be deleted.
VLAN Displays the VLAN on which the static multicast session
exists.
MAC Address Displays the MAC address of the static multicast session.
IP Address Displays the IP address associated with the static
multicast session, if available.
Static Client Ports Displays the number of static client ports associated with
the static multicast session and opens the Static Multicast
Session Client Ports dialog box.