Avaya P580 - Manual (Page 129)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3 3-17
Configuring System Information
Figure 3-11. System Reset Page Window
2. Select Save to save your Running Configuration
(Running-Config to the startup configuration
(Startup-Config before performing a system reset.
* Note: If you do not save your Running-Config to
Startup-Config before you reset the switch, you
will lose all of the modifications you made.
3. Click YES to reset the switch, or NO to cancel the operation.
CLI Command
To reset your switch using the CLI, enter the following command
from Priv mode:
# reset
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Beta Version 5.3 for details about this
command.
SNMP
To reset the switch remotely by using SNMP, use the MIB object that
is listed in Table 1.
* Note: You must have administrative privilege to perform
this task.
Table 1. MIB, MIB Object, and OID for Remotely Resetting the Switch
MIB MIB Object OID
ProminetMib.txt,
version 5.2 promChassisSystemReset 1.3.6.1.4.1.2167.3.1.3