Avaya P580 - Manual (Page 567)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-25
Managing Intelligent Multicasting
Table 6-103. LGMP Server Configuration Dialog Box Parameters
Parameter Definition
Enable State Select to enable or disable LGMP server
configuration. The default value is Disabled.
Proxy Mode Select to enable or disable Proxy mode. Proxy
mode allows the server to send LGMP router
report and leave messages on behalf of neighbor
routers on the same VLAN.
Server ID Priority The priority of the LGMP server on this switch.
The server ID priority and the IP address
associated with the VLAN determine whether the
LGMP server wins LGMP distribution election.
The lower the number the more likely it will win
the election. The valid range is 0 to 255. The
default value is 128.
Router Report
Time The time interval (in seconds) between router
reports sent by the LGMP server in distributor
state. The valid range is 10 to 10,000. The default
value is 125 seconds.
Robustness
Variable The scalar value used by non-distributor LGMP
servers when timing out the LGMP server in the
distributor state. The valid range is 2 to 10. The
default value is 2.
LGMP Servers Displays the number of LGMP servers and opens
the LGMP Server Display per VLAN dialog box.
Note: Only VLANs that have an active IGMP
interface can be LGMP servers.
LGMP Message
Reception
Statistics • Router Report - Displays the number of
LGMP router report messages received.
• Invalid - Displays the number of LGMP
messages received with an invalid payload.