Avaya P580 - Manual (Page 331)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 9-45
Configuring IP Routing
Using the CLI
To create and show IP static routes using the CLI in configure mode:
<configure># ip route <ip-addr> <mask> <next hop
IP address> <cost> <preference>
<configure># show ip route static
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3.1 for details about this
command.
Creating IP Static ARP Entries
You can create static ARP entries on the switch using the Web Agent
or the CLI.
Creating IP
Static ARP
Entries Using
the Web Agent
To create a static ARP entry in your switch’s ARP cache using the
Web Agent:
1. Select Static ARP from the Routing > IP > Configuration
group on the Web Agent window. The IP Static ARP
Entries dialog box opens (Figure 6-35).
Figure 6-35. IP Static ARP Entries Dialog Box
2. Select CREATE. The Add IP Static ARP Entry dialog box
opens (Figure 9-12).
Figure 6-36. Add IP Static ARP Entry Dialog Box