Avaya P580 - Manual (Page 491)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 13-9
Configuring IPX RIP Protocol
Interpreting IPX
RIP Interface
Statistics Using
the CLI
To interpret IPX RIP interface statistics using the CLI, enter the
following command from Interface mode:
(config-if <interface name>)# show ipx interface
[<intf-name>]
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, Version 5.3 for details about this
command.
Network Number The network number of the IPX network
associated with the interface.
Triggered Updates
Sent The number of triggered updates sent from the
RIP interface.
Non-triggered
Updates Sent The number of non-triggered updates sent from
the RIP interface.
Updates Received The number of updates received. Updates may be
received periodically even if no changes have
occurred.
Requests Received The number of requests received on the RIP
interface.
Bad Packets Received The number of bad packets received on the RIP
interface.
Table 6-78. IPX RIP Interface Statistical Parameters continued
Parameter Definition