Avaya P580 - Manual (Page 708)

Appendix A
A-6 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
4. In the File Name field, enter one of the following:
— m5500r_v5.03.01.bin to download version 5.3.1 for the
P550R switch (layer 3)
— m8000r_v5.03.01.bin to download version 5.3.1 for the
P580 switch (layer 3)
— m8800_v5.03.01.bin to download version 5.3.1 for the
P880 switch
— m8000r_v5.03.01.bin to download version 5.3.1 for the
P882 switch
5. In the TFTP Target Section field, select the memory location
to which you want to download the new application
software.
6. In the Perform Update Now field, select Update.
7. In the Get Status of Most Recent Update field, select
Status to verify that the new image downloaded properly.
The status of the update is displayed in the TFTP Update
Status pane.
CLI Command
To download new application software from a TFTP server to an APP
memory location by using the CLI, use the following command:
(configure)# copy tftp flash {app1 | app2}
{cardapp1 | cardapp2} <image_opt_path> <ip-addr>
For more information on this command, see Chapter 27, “System,”
in the Command Reference Guide for the Avaya P550R, P580, P880, and
P882 Multiservice Switches.
Setting the Startup Image
After you download the new software, you must set the switch to
load the new software at startup. You can use either the Web Agent
or CLI to perform this task.
Web Agent
Procedure
To set the switch to load the new software at startup:
1. In the navigation pane, expand the System > Memory
folders.
2. Select FEPROM.