Avaya P580 - Manual (Page 579)

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1 16-37
Managing Intelligent Multicasting
* Note: You must enable intelligent multicasting on a
global basis to activate CGMP snooping
configuration.
2. Refer to Table 6-107 for an explanation of the CGMP
Snooping dialog box parameters.
3. Click...
— APPLY to save your changes
— CANCEL to restore previous settings.
Using the CLI
To enable CGMP snooping using the CLI, enter the following
command from Configure mode:
<configure># set cgmp enable
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
Table 6-107. CGMP Snooping Dialog Box Parameters
Parameter Definition
Enable State Select to enable or disable CGMP snooping.
CGMP
Packet
Reception
Statistics • Join Messages Received - Displays the number of
CGMP join messages received.
• Leave Messages Received - Displays the number
of CGMP leave messages received.
• Unknown Messages Received - Displays the
number of unknown CGMP messages received.
Intelligent
Multicast
Session
Statistics • New Sessions Created - Displays the number of
new multicast sessions created by CGMP snooping.
• New Client Ports Added - Displays the number of
new client ports added to a multicast session.
• Existing Sessions Removed - Displays the
number of existing multicast sessions that have been
removed by CGMP snooping.
• All Sessions Removed - Displays the number of
times that all multicast sessions created by CGMP
snooping were removed.
• New Router Ports Added - Displays the number
of new router ports added by CGMP snooping.
• Existing Router Ports Removed - Displays the
number of router ports that were created by the
CGMP snooper and were removed.