Avaya P580 - Manual (Page 80)

2-22 Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Chapter 2
6. Select a security level from the Security Level pull-down
menu (refer to Table 2-4).
7. Select Enable from the Trap Receiver field pull-down
menu. The default is Disable.
* Note: Select Enable only if you selected Specific
from the IP Address field.
8. Click APPLY to save your changes, or CANCEL to clear
your selection.
* Note: If you click Apply, the changes are saved in the
Running config only. The Startup Config has not
changed. Therefore, these and other changes
will be lost if your switch goes down or if you
power it off.
To save these changes, you must copy the
Running config as the Startup configuration.
Refer to the section “Copying Configuration
Files" section later in this chapter.
Read-Write with
Security Level
Set to admin View and set all switch
parameters, including
community table. N/A
None Disable a string without
deleting it. Access any switch
features.
Table 2-3. Access Level Field Optionscontinued
Access Level Manager Can... Manager
Cannot...
2 of 2
Table 2-4. Security Level Field Options
Option Allows Access to...
normal All switch configuration and reporting functions.
admin All switch configuration and reporting functions, including
access to community configuration.
Custom
Access
Types (if
defined) All switch configuration and reporting functions, including
access to community configuration.